I'm often asked about the kit / hardware I use every day for photography , content and live streaming so in this video I'll go through the lot; EVERYTHING I use that makes editing (photography& video) and streaming so much easier.
You can see all of the kit I go through over on my GEAR page.
*Note … this article contains Affiliate Links
I love my RØDE Wireless GO II microphones but just over a year ago I (temporarily) moved away from using them for 2 main reasons …
The Clip
No Charging Case
I ended up buying the DJI Wireless Microphone set which like the RØDE comes complete with 2 x Transmitters, 1 x Receiver BUT also a magnetic clip AND a charging / storage case.
Well, it’s the fact that you can mount the transmitter so much easier onto your clothing.
With a standard clip you need a lapel for it to hold onto which is fine if you have one, otherwise you need to clip it onto your neckline / collar if you’re wearing a T-Shirt.
The problem doing this is that as you move your head a little, your chin / neck can rub against the transmitter.
Having a magnetic clip means you can put the magentic block on the inside of your clothing and the transmitter on the outside, attaches to it and you’re good to go.
This along with the charging / storage case you would think would make the DJI Wireless Microphones my go to, however I’ve never been happy with the audio quality from them.
The microphones seem to have quite a bad ‘noise floor’ in my opinion (and others I’ve seen) and this gets even worse when you increase the gain, which you need to do. This ends up with you having to do extra processing on the audio to improve it in Adobe Audition, and even then the audio just never sounds as good as the RØDE.
So very recently whilst browsing the RØDE website looking at some new products (RØDE NT1 5th Generation Microphone and the RØDE Caster Duo) purely by chance I ended up scrolling through the Accessories section and that’s when I stumbled upon this … RØDE MagClip GO Magnetic Clip attachment for the RØDE Wireless GO II and Wireless ME …
This is EXACTLY what I’ve been looking for; in fact I’d even drawn up a sketch of the very same and was going to get in touch with RØDE to see if they would make something like it, but it turns out they already have and it works a treat!
All you have to do is to slide the metal sleeve over the clip on the Wireless GO II and then use the the magentic block just as you would with the DJI WIreless Microphones to attach anywhere on your clothing.
Fantastic!
Now you might be thinking … “ Why not just stick the transmitter in your pocket and use a Lav Mic? “
Well there’s a couple of reasons …
Convenience. Having to feed a cable through your clothing so that you can have a Lav Mic, is well, a pain in the a$$. The cable can get caught on clothing as you move, you have to keep taking the transmitter out of your pocket to turn it off and on inbetween recordings and all of this just makes it less user friendly and again being honest, less desire to use them. Just being able to quickly place the transmitter on your clothing and be up and running is so much better!
A decent Lav Mic isn’t cheap. These transmitters are superb. The audio quality is outstanding so I don’t want or need to have to buy an extra Lav Mic to fit into them if I don’t have to. Plus the quality of the transmitters being as good as they are I wouldn’t want to use a cheap Lav Mic; that would be like having a VERY expensive lens and putting a cheap ND filter on the front of it.
The MagClip GO works so well and makes these great little microphones even better, and at around £15 I totally think it’s worth it.
Needless to say, I’m back using my RØDE Wireless GO II’s and VERY happy.
Oh and the charging / storage case … watch this space 😉
© Glyn Dewis 2024
